Uniting the airsoft community in Maryland, DE, PA, NJ & VA

PLEASE HELP :?

MY DBOYS M4 RAS II gun is stuck in safty it will not go into semi or auto feels like the selector switch is stuck I can move the selector switch about halfway between safety and semi and thats it!? any idea of what I will have to do?

0 members like this

▶ Reply to This

Replies to This Discussion

FounderPermalink Reply by Steven Winkler on July 3, 2011 at 4:04pm

It's probably jammed a bit on the selector plate. Don't force it or you may brake the selector plate. Try removing the upper receiver and looking at the connection of the the two. It's easy to do. All you need are some basic tools everyone has laying around. You can even get by with using a key. There are a boat load of videos on YouTube. Easier to watch it done than for me to type it.
Steve

▶ Reply

Permalink Reply by Caleb Stevens on July 3, 2011 at 6:50pm

fixed it took the gear box apart re shimmed the gear. they did a horrific job doing this from the factory, not a big supprise though, well come to find out. what started the whole problem was

the selector switch lost the spring and the bearing for it which lead to more and more problems such as the gun not being properly set to what mode it was going to shoot. :(

so any iea where i can find a medal selcetor switch for dboys m4? airsoftrx.com hasnt opened yet :(

thanks