Chesapeake Airsoft Association

Uniting the airsoft community in Maryland, DE, PA, NJ & VA

GBB Snow wolf Barretta m9(Marui / KJW / HFC compatable) BROKEN TRIGGER(?) HELP.

Guys, my m9's trigger decided to break on me for some reason i've had it for only about a year now and a little while ago i went to go pull the trigger and it came back and the gun fired and completed a chambering cycle and then the trigger just wouldnt snap back to its original place like it usually would, instead it now just has NO RETENTION on the trigger. as if the spring inside that pulled the trigger back so that it would reset itself broke. The trigger kinda just wobbles around and I can't fire the gun now. I stripped it down and examined it and to no avail. I have no clue whats wrong with it and I specialise in m9's. the entire upper slide of the gun is in perfect condition, same with the mag. it has to be something with a spring of some sort in the lower recieved but i dont know how to take it apart any further or how to get the trigger out of the gun because it's like the pin holding the trigger in is welded. if anyone has any idea what part might have broke or what's wrong any and ALL help is APPRECIATED!:) -Archer

 

 

 

Views: 124

Reply to This

Replies to This Discussion

That sounds exactly like what you described. That's definatly an issue with the trigger spring, either it's become disconneced or (most likely) it is broken, as the trigger spring in all M9s are rather known to eventually break. Now, my area is more TM 1911s, but i've had an M9 or two in my time. Don't know the specifics on the snow wolf, but if you have an expanded diagram, take a look at that, as it should help in figuring out how to disassemble it. Thiese links might help you:

http://www.airsoftmonkey.com/content/index.php?option=com_remositor...

 

http://www.eastcoastairsoft.com/forum/viewforum.php?f=32

 

http://www.airsplat.com/airsoft-manuals.htm

 

Worst case, take some pics, and I may be able to figure out how to disassemble it anyway.

I'll post a video in this upcoming week about it because it's alot easier than typing another paragraph haha. and now the mag broke on it as well -.-

RSS

Sponsors

Get a Patch!

Social Media

Connect With Us!
Tag us @chesapeakeairsoft
Hashtag #chesapeakeairsoft

© 2009-2015 Chesapeake Airsoft Association. All rights reserved.   Created by Matt G.   Powered by

Badges  |  Report an Issue  |  Terms of Service

Webify
East Coast Airsoft Top Airsoft Websites
------------------ -->