Uniting the airsoft community in Maryland, DE, PA, NJ & VA

a&k m249 upgrades

I have a a&k m249 and would like to upgrade it some. Any ideas?

0 members like this

▶ Reply to This

Replies to This Discussion

AdminPermalink Reply by Matt G. on November 20, 2013 at 7:07pm

We can do any kinds of upgrades or repairs you might need done at East Coast Airsoft!

And the upgrades depend on what you want it to do. Do you want it to shoot harder, or have a quicker rate of fire or what.

▶ Reply

Permalink Reply by Daniel Grossman on December 29, 2013 at 5:55pm

I would recommend upgrading the cylinder head, and the hopup and hopup bucking and then seeing how it does.

▶ Reply

Permalink Reply by David To on January 9, 2014 at 8:52pm

The saw series gearbox design needs a mosfet. Unlike many other guns when the trigger contacts burn up the gun will not shoot as to the saws micro switch witch will stick and will not stop shooting until you un plug the battery. With a mosfet your gun will also gain rof, and be much more efficient. With just a mosfet upgrade to the gearbox I could pull a m140 spring with ease on just a 9.6v battery.